The 9100 is a multi-function predetermining counter and rate meter that allows simultaneous operation in different modes. It features an enhanced 3-line display, front panel programming and EEPROM memory.
This multi-purpose predetermining counter/ratemeter carries out batch counting, totalising and rate measurement, simultaneously. There are seven modes for counting: A-B, A+B, A/B, count and direction and quadrature x1, x2 & x4. Counting carries on in the background when rate mode is used – signified by an R appearing at the top left hand corner of the display – meanwhile the first line of the display shows pulses per minute (PPM) unless a prescaler is in use.
The 3 line Supertwist LCD display is viewable from any angle and the displayed values, choice of engineering units and 12 characters of user programmable text can be printed directly from the printer port. Other features include the EEPROM memory, which avoids the need for an additional battery, and on-screen programming prompts, which come in four languages to help the user programme the unit to their requirements.
9100 – Predetermining Counter / Ratemeter
85 – 265VAC.
12VDC ±10% 100mA for powering sensors.
3 line high contrast supertwist backlit
LINE 1: 8 numeric LCD
LINE 2: 12 alphanumeric
LINE 3: 12 alphanumeric
Sealed elastometric keyboard with 10 keys.
1 x 9 way and 1 x 10 way plug in terminal strips with wire clamps. Each way capable of accepting up to 2 OFF 2.5mm2 (0.1in2) conductors.
0.0025 – 9.99999 . Multiplying 0.00250 – 9.99999. Dividing 1- 9999.
Input A only. 8 – 30VDC. Maximum 600k PPM (10kHz), minimum 4.7 PPM (0.078Hz ie one pulse every 12.8s)
External reset, count inhibit, keyboard disable. Maximum 30Hz contact closure or solid state input. 8 – 30VDC opto-isolated.
Can be disabled on installation or remotely reset.
Contact closure or pulse (maximum 30Hz)
Program to reset to zero on reaching preset 3 or vice versa.
3 SPST relays. Contacts 5A 260VAC, 220VDC 1300VA/150W. Programmable for pulsed, latched or disabled.
IP65 when properly mounted using gasket supplied.
-10°C to +60°C.
-20°C to +70°C.
85% at 25°C non-condensing.
Not EXACTLY what you were looking for?
Complete the form below and we’ll get in touch within one business day.
Simply enter your email and you can download the Trumeter Product Catalogue.