Welcome to Trumeter Technologies Ltd

3602

Mechanical Totalising Counter (New)

This unit counts revolutions on many different types of production machinery.  Robustly constructed for continuous operation at high speeds with the main shaft running in double oil impregnated bearings to ensure accurate, long term, trouble free service.  Supplied double drive with wing bush, customer configurable reset.

+ Click to enlarge
  • 6 digit 6.4mm (0.25in) readout
  • Up to 3000 counts per minute with 1:1 gear ratio
  • 1:1, 1:10, 2:1, 3:1, 4:1 gearings as standard
  • Front viewing
  • Reset to zero
  • Reset by lever
  • Customer Configurable Reset

Specification
Display

White on black, decimals black on white 0.25in (6.4mm) figures

Base Material

Stainless Steel

Cover Material
Grey ABS plastic
Drive Shaft Diameter
0.275 inch (7mm) diameter
Gearing
1:1, 1:10, 2:1, 3:1, 4:1 as standard. Others on application
Bearings
Bronze, oil impregnated for life
Operating Torque
180g.cm (2.5oz.in) at 1:1 gearing
Maximum Shaft Speed
3000 RPM
Maximum Count Speed
3000 CPM
Operating Temp
-10°C to +50°C
Storage Temp
-20°C to +50°C
Environmental Protection
IP40
Nett Weight
280g

Ordering Information
Counter Type Number of Decimal Places Figure Wheel Reading Gear Ratio Drive Direction
3602 - FRONT VIEWING 0 NO DECIMAL PLACES 0 FULL FIGURES (PLAIN) 0 1:10 TC TOP COMING
  1 ONE DECIMAL PLACE 1 0 - 11" FIG WHEEL (FEET & INCHES) 1 1:1

-ALL COUNTERS ARE 6 DIGIT
-RESET POSITION IS CUSTOMER SELECTIVE
-DOUBLE DRIVE SHAFT WITH WING BUSHES FITTED AS STANDARD

EXAMPLE OF CODING: 3602-117TG

3602 = FRONT VIEWING
1 = ONE DECIMAL PLACE
1 = 0 11" FIG WHEEL (FEET & INCHES)
7 = 2:3 RATIO
TG = TOP GOING

 2 0- 9 " FIG WHEELS (FEET & TENTHS) 2 2:1
3 0 - 9" FIG WHEELS (YARDS & TENTHS) 3 3:1
4 FULL FIGURES (FEET) 4 4:1
5 FULL FIGURES (YARDS)   TG TOP GOING
6 FULL FIGURES (METRES)
  7 2:3
 
9 0 - 9cm FIG WHEEL 100 LINES (M/cm)

 

© Trumeter Technologies 2011

Design: K2L Marketing